Simple ways to Remove Window Tint – Wheelsonspin
Wheelsonspin
Car care Cleaning & Detailing

Simple ways to Remove Window Tint

Tinted windows in a car are a wonderful thing to watch. They not only protect you from sun glare but also provide style and privacy. Unfortunately, the tint also has a lifespan and if you do not know how to remove the window tint in the right manner, you will end up in a huge problem.

There are two ways to remove tint: scraping and heat. Based on the reason you select to remove the tint film from your car windows, the best treatment will be dissimilar. You will also require cleaning the glass afterwards, as these ways are not enough to remove the adhesive completely.

Why should we remove tint?

There are three main reasons to get rid of the tint on the car windows, each having their own set of challenges.

Aesthetic reasons- Sometimes, you don’t want tinted windows, even though they are in good condition. This can be frustrating, as the adhesive is probably at its strongest. However, heat methods work in a proper manner against the undamaged tint film.

Bubbling- Bubbling film not only appears horrible, but there is also no method to fix this issue. The first feeling you might get is to peel at the spot where it is bubbling, but this can cause a mess of tint chunks and glue. On the bright side, bubbles are caused due to failing adhesive, making it simpler to remove.

Discolouration- With time, window tint will turn into a purplish shade and you will want to consider changing it. As the ability of the tint to block UV rays lessens the more it turns to purples colour, the issue is something more than a simple aesthetic one. This change in colour is because of the breakdown of non-metallic dyes and cannot be fixed. Again, heat is one of the best ways to handle this issue.

How to Remove Window Tint with Heat

Heat is the best way to loosen intact fil, though it may need some scraping to remove the film fully. Generally, you will require minimal use of a scraper for these ways.

Heat Gun or hairdryer- This is a simple way to remove the tint and works well equally with a heat gun, though it can get a bit messy. You will want to choose a corner to begin the procedure.

  1. Hold the hairdryer nearly two inches from the window and run it on high till the glue melts sufficiently to pry the edge up with a fingernail.
  2. Tilt the dryer so that it hits where the window and film meet, slowly peeling, as the glue starts getting soft.
  3. Making use of a clean towel, rub the adhesive way, utilizing your hairdryer for softening it as required.
  4. When the glue is removed, wash the car’s window with a cleaner.

Steam Cleaning- Perhaps the best method to remove window tint is to collect a fabric steamer. After a few minutes of steaming the windows, you will melt the glue and the tint will come off. One best thing about this process is the excuse to also clean the upholstery of your car. When the tint is off, you will have a bit of glue to cope with.

Related posts

Tips and Tricks to Increase the Mileage of your Car

How to Increase the Speed of your Car

Everything About Automatic Car Wash- Pros & Cons